IxCatServerApnRangeBase

Extends IpDynamicProviderRange

DESCRIPTION

This class has no description.

OPTIONS

Parameter Description
apn
String, default = ""
enableLifetime
If enabled the default pdpContext will be deleted using the PGW initiated pdpContext deactivation procedure
Boolean, default = False
enableSecondaryPDPContextDelay
Delay Network Initiated Secondary PDP Context Creation
Boolean, default = False
fakeQoS
Quality of Service characteristics for the primary PDP contexts.
String, default = "Click to set..."
ipType
PDN type supported by the Access Point
String, default = "IPv4"
Choices:
IPv4 - IPv4 (default)
IPv6 - IPv6
IPv4v6 - IPv4v6
l7ServerCount
Layer 7 Server Count Per Port
Integer, min = 1, default = 1
l7ServerIPv4
L7 Server IPv4
String, default = "22.22.22.22"
l7ServerIPv6
L7 Server Ipv6
String, default = "::1616:1616"
lifetime
The time, in seconds, after which the default pdpContext is deleted
Integer, max = 1000000, default = 10
mss
The Maximum Segment Size (Bytes), defines the maximum length of the data. TCP over GTPU MSS = MTU - TCP header size - IP header size - GTP header size - UDP header size - IP header size. Theoretically, this value can be as large as 65495, but such a large value is never used. For traditional Ethernet the maximum value for MSS is 1424 = 1500-76. With Jumbo Frame support, the maximum value is 9424 = 9500-76. This is the MSS advertised in the TCP Syn + ACK package and the uplink TCP traffic is the one that should respect this MSS.
Integer, max = 65495, default = 1424
pdpContextsList
List of IxCatSGSNIuPSSecondaryPDPContexts objects
poolSize
The number of IP addresses in the pool.
Integer, min = 1, default = 100
poolStartIPv4
Pool Start IPv4
String, default = "172.16.0.1"
poolStartIPv6
Pool Start IPv6
String, default = "BEEF::AC10:65"
qosv1
QoSv1 settings
Reference to IxCatServerQoSv1
secondaryPDPContextDelay
Time to wait (in seconds), from the moment the UE is attached, before sending "Create Secondary PDP Context"
Integer, min = 1, default = 1
totalL7ServerCount
Layer 7 Server Count On All Ports
Integer, default = 0